Allen-Bradley 2-D Instrukcja Instalacji Pobierz pdf (Strona 6)

AN-0130 5 of 22 Revision B

The following is a list of warnings and cautions that must be observed when working

with Moog High Force Linear Motors.

WARNING: This equipment contains HIGH ENERGY PERMANENT

MAGNETS. Do not attempt to disassemble. Serious damage

to property or injury to person may result. Keep ferrous

materials away from the motor.

WARNING: Improper Servo tuning can cause uncontrolled

motion of the Moog motor. Do not allow the system to

oscillate during the tuning process, and keep all

persons and body parts away from moving parts.

WARNING: Do not use drives powered by voltages greater than

240 VAC.

WARNING: Keep fingers and limbs clear of the motor and

moving parts when power is applied to the motor.

WARNING: This system produces very high forces and rapid

motion. Under no circumstances should it be

operated when hands, fingers or clothing are in, on,

or near the motor. Guards should be installed to

prevent such items from coming into contact with the

motor or other moving parts.

CAUTION: Only use Anderol 465. Other lubricants could break

down prematurely and cause permanent damage to

the motor and contaminate the bearings.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Viktor 14 May 2024 | 15:54:21

Hello!

Allen-Bradley 2-D Instrukcja Instalacji Strona 6