Allen-Bradley 1738-ADNX Instrukcja Użytkownika Strona 110
- Strona / 134
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Publication 1738-UM001A-EN-P - February 2005
C-2 Rules and Guidelines For the 1738-ADNX
RULE 9: Subnet modules not on the backplane must always have or
be assigned MACID’s higher than those of the backplane modules.
RULE 10: Power must be supplied for non-backplane Subnet modules.
The 1738-ADNX supplies only 5V dc power to the backplane
ArmorPoint I/O modules, and 24V dc power to the non-backplane
modules via the auxiliary power connector, pins 2 and 3.
RULE 11: The 1738-ADNX connection sizes may have to be manually
entered into the primary DeviceNet network scanner device’s scanlist
(1756-DNB, 1747-SDN, etc.). Those connection sizes can be read from
the EDS parameters 8-11 or deduced from the 1738-ADNX adapter’s
Subnet I/O mapping.
RULE 12: Explicit message requests will not transmit from the Subnet
to the primary DeviceNet trunk. For example, a laptop computer
connected to the Subnet with RSLinx will not be able to browse onto
the primary DeviceNet.
RULE 13: Any master connected to the Subnet cannot own a
ArmorPoint I/O module on the 1738-ADNX backplane.
RULE 14: The 1738-ADNX does not autobaud on the Subnet.
- ArmorPoint I/O 1
- DeviceNet 1
- Adapters 1
- Important User Information 2
- Purpose of This Manual 3
- Who Should Use 3
- This Manual 3
- What the Manual Contains 4
- Related Terms 5
- Preface 4 6
- Related Products and 7
- Documentation 7
- Preface 6 8
- Table Of Contents 9
- ii 10
- Appendix D 11
- Default Data Maps 11
- iv 12
- Mount the Adapter and 13
- I/O Base 13
- Set the Node Address 14
- Wire the 15
- DeviceNet Adapters 15
- Chapter Summary and 16
- What’s Next 16
- Use the Adapter 18
- 3. Configure the Subnet I/O 19
- IMPORTANT 21
- Understand the DeviceNet 22
- Network and Subnet 22
- Data Collection 23
- Module Power 23
- Adapter Features 24
- Baudrates 25
- Auto Start Mode 25
- Auto Catalog Replace 26
- Backplane Autobaud 28
- Auto Address 29
- Physical List Acquire Status 29
- Cycling Node Status 30
- Poll Connection Produce Size 30
- Cycling I/O Mapping 31
- Automatic Device Replacement 31
- Physical Ordering 32
- Interscan Delay (ISD) 33
- Expected Packet Rate 33
- Communicate Through 34
- Image Table Mapping 36
- Communicate With 39
- I/O Modules 39
- Use Diagnostic Tables 40
- Use Auto Start Mode 43
- Why Use Auto Start Mode? 44
- Byte Boundaries 45
- Word Boundaries 45
- Double Word Boundaries 45
- Fixed Boundaries 45
- Install the I/O Module 46
- Use RSNetWorx 47
- Double click on 48
- Begin Auto Start Mode 49
- Use Custom Configuration 51
- Configuration Overview 53
- Set the Scanner’s Parameters 55
- DeviceNet Scanner’s Scanlist 61
- Set the Adapter’s Parameters 63
- Chapter Summary 66
- Troubleshoot the ArmorPoint 67
- DeviceNet Adapter 67
- Guidelines for Using 69
- Your Adapter 69
- Specifications 71
- A-2 Specifications 72
- Specifications A-3 73
- A-4 Specifications 74
- Quick Start For the 1738-ADNX 75
- Subnet Out 82
- MACID Parameter 83
- Review of the 1738-ADNX 83
- Rules and the 83
- Review of Auto Start Mode 85
- Browse the Subnet 89
- Inputs and Outputs 93
- Navigate Between Networks 98
- Switch Between Networks 100
- 1. Slot Number 102
- 2. Scanlist tab 102
- 1738-ADNX 105
- Appendix 109
- Message size: 1 Byte 112
- Message size: 6 Bytes 117
- Message size: 4 bytes 119
- Message size: 2 Bytes 119
- Message size: 8 Bytes 121
- 1738-232ASC ASCII Module 123
- 1738-485ASC ASCII Module 123
- D-14 Default Data Maps 124
- 2 126
- 3 127
- 4 128
- 5 129
- 6 130
- How Are We Doing? 131
- BUSINESS REPLY MAIL 132
- Rockwell Automation 134
Powiązane produkty i podręczniki dla Nie Allen-Bradley 1738-ADNX
Nie Allen-Bradley 1734-ADN Dokumentacja
(28 strony)
(28 strony)
Nintendo Legend of Zelda - Ocarna of Time 3D (DS) podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Gry Nintendo Legend of Zelda - Ocarna of Time 3D (DS).
Dostarczamy 1 pdf podręczników Nintendo Legend of Zelda - Ocarna of Time 3D (DS) do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Komentarze do niniejszej Instrukcji